VEHICLE INSTALLATION




Spray surface with soap free cleaning liquid. You can use must types of window cleaners. We use 50% Isopropyl alcohol 50% water mixture. Be sure to clean any handles molding edges & door jams.	Hold vehicle graphic up to body for alignment. Make sure to place graphic knowing that you have door handles & molding to work around.	Make marks on graphics and on body with an eraseable pen or pencil.



Pull back the backing paper & align marks. Squeegee from the center up & down to the back while pulling the backing paper back..	Now pull application tape towards the back & down. Don’t worry about bubbles! We make all our stickers with the newest materials that allow the air to escape.
		Cut the seam on the back edge of the front door using the door as a straight edge. Squeegee the graphic in on the the door jam.




	All finished... Just stand back and enjoy your sticker..